SMA SHP 100-20, Manual

Page: 10 / 218

3 Symbols on the Product SMA Solar Technology AG
Quick Reference Guide SHPxxx-20-IS-xx-10 10
NOTICE
Destruction of the measuring device due to overvoltage
• Only use measuring devices with a DC input voltage range of 1500 V or higher and an AC
input voltage range of 600 V or higher.
3 Symbols on the Product
Symbol Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally grounded if addi-
tional grounding or equipotential bonding is required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentation
Observe all documentation supplied with the product.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
Three-phase alternating current without neutral conductor
Direct current
The product is has no galvanic isolation.
ENGLISH