background image

SMA Solar Technology AG

9  Troubleshooting

Installation Manual

HoMan-IA-en-17

57

The PV System Setup Assistant 
lists none or not all of the 
BLUETOOTH devices in your PV 
system.

The wireless connection of several devices may be disturbed by 
ambient conditions.

Corrective measures:

• Ensure that the connection quality for the BLUETOOTH 

devices is at least "good" (see BLUETOOTH device 
manuals).

• If the connection quality is not at least "good", use a 

BLUETOOTH repeater or SMA radio-controlled socket.  
This will extend the wireless range of your BLUETOOTH 
network.

Inverters with BLUETOOTH Piggy-Back shut down overnight.  
For this reason, the Sunny Home Manager cannot establish a 
connection to these inverters during this time.

Corrective measures:

• Select [

Skip forward

] and continue with registration.  

After registration, add devices to the system as new devices 
when there is sufficient irradiation (see user manual 
"SUNNY HOME MANAGER in Sunny Portal").

The devices of your PV system may not be commissioned. In this 
case, the Sunny Home Manager cannot establish a connection to 
these devices.

Corrective measures:

• Commission the devices.

Insufficient radio range of the inverter with BLUETOOTH 
communication interface.

Corrective measures:

• Use SMA BLUETOOTH Repeater or SMA radio-controlled 

socket. This will extend the wireless range of your 
BLUETOOTH network.

Insufficient transmission power of the inverter with 
SMA BLUETOOTH Piggy-Back Plus

Corrective measures:

• Use the antenna extension add-on kit "ANTEXTKIT25-10".

Problem

Cause and corrective measures

Summary of Contents for HM-BT-10














































































Reviews: