manualshive.com logo in svg

SMA CLUSTER CONTROLLER, User Manual

Share
Download
SMA CLUSTER CONTROLLER User Manual Download Page 61

• Select the desired SMA Modbus profile and select [

Open

].

☑ The file name of the SMA Modbus profile is displayed in the field 

Update SMA

Modbus profile (*.xml)

.

• Select [

Refresh

].

5. To update the user-defined Modbus profile, perform the following steps:

• In the field 

Update user-defined Modbus profile (*.xml)

, select [

Browse...

].

☑ The file selection window opens.

• Select the desired Modbus profile and select [

Open

].

☑ The file name of the user-defined Modbus profile is displayed in the field 

Update

user-defined Modbus profile (*.xml)

.

• Select [

Refresh

].

Saving the System Configuration

1. Select the Cluster Controller in the system tree and select the menu 

Update and save

 in the

device menu.

2. Select the parameter group 

Modbus

.

3. To save the automatically created system configuration, select [

Save automatically

generated system configuration (sysplant.xml)

].

4. To save the user-defined system configuration file, select [

Save user-defined system

configuration (usrplant.xml)

].

Updating the System Configuration

1. Log into the Cluster Controller as 

Installer

.

2. Select the Cluster Controller in the system tree and select the menu 

Update and save

 in the

device menu.

3. Select the parameter group 

Modbus

.

4. In the field 

Update user-defined system configuration (*.xml)

, select [

Browse...

].

☑ The file selection window opens.

5. Select the desired system configuration file and select [

Open

].

☑ The file name of the system configuration file is displayed in the field 

Update user-

defined system configuration (*.xml)

.

6. Select [

Update

].

12 Modbus Configuration

SMA Solar Technology AG

User Manual

61

ClusterController-BA-en-15

Summary of Contents for CLUSTER CONTROLLER



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands