manualshive.com logo in svg

SMA CLCON-10, Installation Manual

Share
Download
SMA CLCON-10 Installation Manual Download Page 65

6.14 Configuring a Static LAN

You can configure the Cluster Controller and the inverters in the system for a static LAN (see the
Cluster Controller user manual). The Cluster Controller and the inverters are configured for
automatic address allocation via DHCP by default.

6.15 Setting Up a Modbus Data Connection

Additionally required material (not included in the scope of delivery):

☐ Up to two Modbus clients

Requirements:

☐ The Cluster Controller and the Modbus client must be located in the same LAN (see

Section 6.9, page 38).

☐ Commissioning of the Cluster Controller must be completed.

Set up the Modbus data connection via the Cluster Controller user interface (see the
Cluster Controller user manual) and the Modbus client (see manual from manufacturer). For further
information on possible Modbus settings on the Cluster Controller, see the Technical Description
"SMA CLUSTER CONTROLLER Modbus® Interface".

6 Connection and Commissioning

SMA Solar Technology AG

Installation Manual

65

ClusterController-IA-en-15

Summary of Contents for CLCON-10























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands