SMA America, LLC
5 Mounting or Installing
Installation Manual
BTRPIN-IA-eng-IUS113911
15
5 Mounting or Installing
You have the option or either installing or mounting the SMA
Bluetooth
Repeater.
5.1 Selecting the Mounting/Installation Location
Observe the requirements for the mounting/installation location:
☐ The mounting/installation location is indoors.
☐ The device is protected from dust, moisture and corrosive substances at the mounting location.
☐ Minimum clearances have been observed.
Figure 4: Minimum clearances to be observed
☐ The mounting/installation location is in the vicinity of a socket-outlet.
☐ Observe a minimum distance of 4 ft. (1m) to devices using the 2.4 GHz frequency band, e.g.,
Wi-Fi devices, microwave ovens. This is to prevent any reduction in connection quality or data
transmission speed.
Determining the Mounting or Installation Location
Determine the mounting/installation location by varying the distance between the SMA
Bluetooth
Repeater and devices with a critical connection signal until all devices display at least a "good" signal.
Requirements:
☐ The "
MODE
" rotary switch is at position "
0
" (see Section 7.1 "Setting the MODE", page 20).
☐ The "
NetID
" rotary switch is set to the NetID of the plant (see Section 7.2 "Setting the
NetID", page 20).
Summary of Contents for BLUETOOTH REPEATER
Page 2: ......
Page 31: ......
Page 32: ...XXX 4 4PMBS DPN 4 4PMBS 5FDIOPMPHZ 4 NFSJDB XXX 4 NFSJDB DPN ...
