5
User's Manual PS08A / PS10A
6
Precautions
Please read carefully before proceeding
Warning:
Esempio 3
Esempio 1 / Esempio 2
I
T
A
L
I
A
N
O
E
N
G
L
I
S
H
MIC IN
RCA IN
XLR AUDIO OUTPUTS
LINE IN
LI
N
E
IN
LI
N
E
IN
LINE IN
T
U
O
E
N
I
L
T
U
O
E
N
I
L
To prevent the risk of fire or electric shock, do not expose this product to rain or humidity
1.
All warnings, in particular those relating to safety, must be read with special attention, as they
contain important informations.
2.
The supply voltage of the appliance is sufficiently high to involve a risk of electrocution: never
install or connect with the power on.
Before powering up, make sure that all connections are correct and that the voltage of your mains
supply corresponds to that for the appliance, otherwise contact a SM dealer.
The metallic parts are earthed via the power cable. If the socket used for the power supply does
not provide the connection with the earth, contact a qualified electrician, who will connect the unit
to the ground using the terminal provided.
Make sure that the power cord is not stepped on or crushed by objects in order to preserve its
integrity.
To avoid the risk of electrical shock, never open the equipment: there are no parts that can be
used by the user.
3.
Do not allow objects or liquids can get into the product, as they may cause a short circuit.
4.
Do not carry out any operations / modifications / repairs that are not expressly described in the
instruction manual.
Contact your authorized service center or qualified personnel when:
•
The device does not work (or works in an anomalous way);
•
The power cord has been damaged;
•
Objects or liquids have got into;
•
The unit has received a sharp blow.
5.
If this product is not used for long periods, remove the tension of the power cable (or disconnect
the external power supply).
6.
If this product begins emitting strange odors or smoke, switch it off immediately and remove the
voltage from the power cable (or disconnect the external power supply).
7.
Do not connect any other equipment or accessories not foreseen. When is the suspended
installation, only use the dedicated anchoring points and do not try to hang this product by
unsuitable or elements provided for this purpose.
Verify the adequacy of the support (wall, ceiling, structure, etc., which is anchored in the product)
and the components used for fastening which must guarantee the safety of the system /
installation over time, considering, for example, mechanical vibrations normally generated by a
transducer. To avoid the danger of falls, do not stack multiple units of this product unless this
possibility is not specified in the instruction manual.
