7
Manuale Utente PS08A / PS10A
4
E
N
G
L
I
S
H
Installation
Place the speaker on a solid flat surface (table, ground, etc.) or use a solid speaker stand with
35mm flange. Make sure that all fixings are tight.
Power connection and wiring
Please connect the power cable to 110/220(230)V 50/60Hz power voltage. Make sure to set the
power input selector to the available net voltage. Connect all input/output signals with XLR and/or
6.35mm jack cables. Do not connect multiple inputs possibilities (ex. RCA/ Jack 6,35mm) with
more than one cable.
After you finished all audio connections set master volume to “0”. Switch on audio source and
speaker power. Set Mic/Line level to 12 o'clock position and increase master volume to comfortable
level.
Getting started
Ø = 35 mm
I
T
A
L
I
A
N
O
1
1a
2a
4
5
6
7
9
10
8
2
3
1 Ingresso Microfonico COMBO
Consente di collegare un microfono tramite XLR o Jack 6.35 mm
1a Controllo volume Microfono
Usa questo controllo per regolare il livello del microfono
2 Ingresso Linea COMBO
Consente di collegare un'apparecchio esterno (CD,radio / DVD, ecc)
tramite XLR, Jack 6.35mm o connettori RCA
2a Controllo volume Ingresso Linea
Usa questo controllo per regolare il livello della sorgente Linea
3 Uscita Segnale
Usa un connettore Jack 6,35 o XLR per collegare un diffusore amplificato supplementare
4 Volume
Consente di regolare il Volume generale
5 Treble
Consente di regolare i toni acuti
6 Bass
Consente di regolare i toni bassi
7 POWER LED
8 CLIP LED
9 ON/OFF Power Switch
Interruttore di accensione/spegnimento
10 AC Power
Usa questo connettore per collegare il cavo di alimentazione
8.
It is strongly recommended that the installation of this product is only performed by professional
qualified installers (or specialized firms) who can ensure correct installation and certify it
according to the current regulations regarding electrical systems.
9.
HEARING LOSS
Exposure to high noise levels may cause permanent hearing loss. The acoustic pressure level for
the hearing loss is different from person to person and depends on the duration of exposure. To
prevent potentially dangerous exposure to high sound pressure levels, it is necessary that
anyone subjected to such levels must use suitable protections; when operating a transducer
capable of producing high sound levels is necessary to wear ear plugs or protective earphones.
See technical specifications in the instruction manual for the maximum sound pressure the
loudspeaker is capable of producing.
