SM Pro Audio
Page 31 of 66
V-‐Machine Operating Manual
I.
Output (Mono / Stereo)
. The V-‐Machine’s audio output can be adjusted as either mono or
stereo. Some plug-‐ins only operate in MONO, and as such it may be desirable to output the
same signal from both physical outputs. It may also be necessary to send a MONO signal
to an amplifier for monitoring, and to the front of house in performance situations where
there is limited audio channel support.
Use the Next/Previous keypad buttons adjacent to the Output label to toggle the setting
from Stereo or Mono.
II.
Input Gain
. The V-‐Machine’s audio input gain can be adjusted to accommodate differing
input signal levels. This is very handy when using the V-‐Machine as a real-‐time audio
processor (effect unit).
Use the Next/Previous keypad buttons adjacent to the Input Gain label to adjust the input
level up or down in .1dB steps.
10.3.1.3
Menu – MIDI Options
The MIDI options offer the following configuration options:
I.
Prog Change (Patch / Preset)
. By sending MIDI Bank and Program change messages from
a connected MIDI controller it is possible to change the current Bank and Preset of the
V-‐Machine. This can be handy if the V-‐Machine controlled by a sequencer, or is not within
reach to click the keypad buttons manually.
Please refer to your MIDI controller devices operational manual for information on how
to transmit MIDI Bank and program change messages.
The V-‐Machine can be configured to pass MIDI program change messages to either
Patches or Presets. When set to Patch, program change messages are passed directly to
the current Plug-‐in to change internal patches. When set to Preset, program change
messages will change the V-‐Machine Preset.
The V-‐Machine always responds to standard MIDI Bank messages.
II.
Param Feedback
. The V-‐Machine’s parameter feedback setting can be turned On or Off.
Parameter feedback is especially useful when using external motorized MIDI controllers.
Motorized faders, or led encoded pots will update to the correct positions when changing
Patches and Presets on the V-‐Machine.
10.3.1.4
Menu – MIDI Control
The MIDI control section of the Global System Settings offers the ability to configure external
MIDI control of the V-‐Machines button interface, functions, and other useful settings.
Control assignments allow you to
remote control
your V-‐Machine button interface from an
external MIDI controller.
MIDI controllable buttons, functions, and settings include:
•
Bank knob
•
Preset knob
