LP RANGE STIRRED WATER BATH
LAB PRO - 3 YEAR WARRANTY
6
CARE AND MAINTENANCE
Please ensure that the washing agent and sanitizing agent are BSI
accredited and approved by the H&S department for use on
laboratory equipment and stainless steel within your laboratory.
DISCONNECT THE BATH FROM THE POWER SUPPLY PRIOR TO
CLEANING
BASIC CLEANING
The water bath should be cleaned at regular intervals by wiping external surfaces with
a cloth or sponge soaked in warm water with a mild detergent. DO NOT USE STRONG
SOLVENTS OR SOLUTIONS CONTAINING CHLORINATED HYDROCARBONS, ESTERS,
KETONES OR ABRASIVE CLEANERS AS THIS MAY DAMAGE THE BUILT IN ANTI BACTERIAL
PROPERTIES.
The “anti-bacterial” paint finish inhibits the growth of bacteria. It has been tested by
independent specialist houses using internationally recognised test methods and
proven to be effective against a wide range of bacteria including Escherichia Coli and
Staphylococcus Aureus (MRSA).
We recognise hygienic coatings are part of a controlled approach to a cleaner working
environment. Within the paint formulation is an active ingredient with proven anti-
bacterial properties which is maintained throughout its life span. In a laboratory
environment this is one less source of contamination. Unlike detergents the anti-bacterial
paint finish does not offer an instantaneous action, but is intended for long term general
protection against bacterial growth.
Moisture on the painted surface is necessary for the bacterium to absorb the agent and
be affected by it. The coating is therefore less active in very dry conditions although
moisture in the atmosphere will maintain some activity. Areas where moisture is trapped
are difficult to clean and allow bacteria to proliferate but these areas are most active for
the anti-bacterial coating improving defence against bacterial growth.
!
