LP RANGE STIRRED WATER BATH
LAB PRO - 3 YEAR WARRANTY
2
Dear Customer
Thank you for purchasing this piece of Lab Pro temperature control equipment. To get
the best performance from your equipment and for your own safety please read these
instructions carefully before use.
GENERAL NOTES
1. This product is designed for laboratory use only. Always follow good laboratory
practice.
2. If this product is not used in accordance with these instructions then basic safety
protection may be affected.
3. The mains supply cord fitted to this product is heat resistant and should be
replaced with an equivalent type by a qualified electrician.
4. Ensure that the power supply has a safety earth (ground) terminal.
5. Ensure that the mains switch and power supply connector are accessible during
use.
6. Before using any cleaning or decontamination method please refer to the
Maintenance and Cleaning section to ensure the proposed method will not
damage the unit.
7. Connect only to a power supply with the corresponding voltage to that specified
on the rating label positioned on the rear of the unit.
8. Do not block ventilation slots during use and always follow installation
instructions.
9. Ensure substances being heated present no risk of a hazard (explosion, implosion
or release of toxic or flammable gases) or that these have been addressed. When
heating substances where liberation of gases occurs suitable extraction should be
used.
10. Use only liquids specified within this Instruction Manual within their specified
temperature range.
11. Drain before moving the bath.
