7
Prop Saver Installation
•
Assemble prop saver by inserting
two screw into prop adapter hub
•
Slide prop saver onto motor shaft
per illustration and tight screws
with Phillips head driver.
Wing Assembly
•
Drop top wing onto top of
fuselage. It will snap into place
from magnets. After flying, you
can adjust the wing on the magnets
to get the plane to fly straight and
level.
•
Be sure to
press
the leading edge
magnet down firm each time you
assemble the plane to make sure
the magnets have good contact.
•
Plug one of each lower wing into
each side of fuselage lower wing
slot. These will snap into place
with the magnets that are already installed in these wings.
•
Carefully slide wing struts onto ends of wing panels.
Other Flight Items
•
CG location is about 1.5 inches behind the leading edge of the lower wing.
•
Go to
www.SlowBipe.com
for flight instructions