Universal Live Timing Box Rev 2.0 User manual
18.2.1.3 Download Language function
To change or update the language of lap times playback, select the
"Download Language"
function.
This triggers a mwarning message informing the user that the operation causes the erasure of all the
data from the internal memory of the
Universal Live Timing Box.
Click:
•
“yes”:
user is aked to select the language to be downloaded: for example,
ItalianLanguage.txt
. If the
Universal Live Timing Box
contains a language different from the
selected one, writing of memory begins immediately, otherwise the user must confirm
overwriting of the previous language. Note that during the
download
phase the
"Audio Off"
red LED of the
Universal Live Timing Box
is on. Once the operation is completed, click OK
to return to the initial page,
"Function selection"
;
•
“no”:
user ir returned to the initial page,
“
Function selection”
.
18.2.1.4 Download telemetry data function
To download the data stored on the internal memory of the
Universal Live Timing Box
to the PC,
the user must select
"Download telemetry data"
from the
"Selected function"
drop-down menu, and
then select a file name to write the data to. Writing on an existent file requires a user confirmation.
During the
download
, the application creates two files both having the name indicated by the user,
but differentiated by the addition, at the end of the name, of "_t" and "_d" (for example, if the name
is
Dati.txt
, the created files will be
Dati_t.txt
and
Dati_d.txt
). The file ending with "_t" contains the
times of the driver, the other file the possible telemetry data. If there are no telemetry data, the latter
file is created anyhow, but it remains empty. At the end of all this, the application asks the user if he
wants to move directly on to the
postprocessing
phase: if not, user is returned to function selection.
For the entire duration of the download the
"Audio Off"
LED stays on.
18.2.1.5 Erase stored data function
To erase the data stored on the internal memory of the
Universal Live Timing Box
it is necessary to
select
"Erase stored data"
from the
"Selected function
" drop-down menu. A warning message
message then appears, reminding the user that all data stored in the internal memory of the
Universal Live Timing Box
is going to be erased. Note that only the stored data is going to be
erased, not the language. Click "YES" to proceed. If the memory was already empty, a message
informs the user, else erasing begins, during which, the
"Power/Mem"
LED of the box flashes red.
18.2.1.6 Telemetry function
This function is only available if a SCP-1 or a Track Interface is connected to the Live Timing Box.
When selected, the user is asked to confirm that an SCP-1 is connected. If this is the case, before
proceeding, the PC software requires the following actions to be taken out:
•
select the number of timing sectors in the track;
•
click on the
"START TEL"
button on screen, flashing with yellow light;
•
insert the name of the file to save the downloaded data to. File handling is exactly the same
as described above in the download telemetry data function.
Full telemetry function is available only if a SCP-1 is connected to the box. If not, that is, if a Track
Interface is connected, then only the 'PC Chrono' features are available at this point.
49
