Universal Live Timing Box Rev 2.0 User manual
18.2.1 Use the application to communicate with the
Universal Live
Timing Box
If the
Universal Live Timing Box
is connected to the PC, the user can select the operation he wants
to perform by the
"Selected function"
drop-down menu (figure. 40):
1.
“Telemetry”:
unless a SCP-1 or a Track Interface are connected, this should not be chosen.
If you do this by mistake, answer 'NO' to the confirmation menu which pops up next.
Otherwise, click 'Yes': if a Track Interface is connected, the 'PC Chronometer' function is
automatically selected. If a SCP-1 is connected to the ULTB instead, both the 'Live
Telemetry 'and 'PC Chronometer' are available.
2.
“Postprocessing”
: analyse the data saved on the PC during the Telemetry
Live
function or
downloaded from the
Universal Live Timing Box
and then saved on the PC. For further
details, see paragraph 18.2.1.7 .
3.
“Download language”
: update/change the language of lap time playback. For further
details, see paragraph 18.2.1.3 .
4.
“Download telemetry data”
: download and save in a file the data stored on the internal
memory of the
Universal Live Timing Box.
For further details, see paragraph 2.2.1.2.
5.
“Erase stored data”
: erase the data stored on the memory of the
Universal Live Timing
Box
. For further details, see paragraph 18.2.1.5 .
6.
“Live Timing Box setting”:
read and reprogram the internal settings of the device.
48
Figure 40:
Selected function menu.