ADA Compliant
EAF-100/150 I.I. — Rev. 1 (07/04)
Code No. 0816542
INSTALLATION INSTRUCTIONS
ELECTRONIC
SENSOR OPERATED
LAVATORY FAUCETS
EAF-1150 Series
Battery Powered
Sensor Operated
Lavatory Faucets
EAF-1100 Series
Plug-in Transformer Powered
Sensor Operated
Lavatory Faucets
Sloan’s Optima
EAF-100/150 Series electronic hand washing
faucets operate by means of a dual infrared sensor and microprocessor
based logic. The modular design of the faucet simplifies installation and
maintenance by incorporating all of the operating components above the
sink within the die-cast metal spout.
ISM models feature an integral temperature control lever to allow the
user to adjust water temperature. The faucet can also be adjusted and set
to a fixed mixer setting. Faucets ordered without the ISM variation must
be connected to a single, pre-tempered water supply.
The faucet is also available with the
- Click feature. This feature
allows the user to set faucet modes, including “continuous run” and
“temporary off” simply by pressing a button on the spout. This feature is
recommended only in installations where users have a regular familiarity
with the faucet (i.e., executive and non-public rest rooms). Models
furnished with the
- Click feature are also available with a Drain Pop
Up.
Optima
EAF-150 series faucets include a 6 VDC lithium battery.
Battery life is approximately three (3) years. EAF-100 series faucets are
hard wired and include a plug-in transformer.
The following instructions will serve as a guide when installing the Sloan
Optima EAF-100/150 series sensor operated faucets. As always, good
safety practices and care are recommended when installing your new
faucet. If further assistance is required, contact your nearest Sloan
Representative office or the Sloan Installation Engineering Department at
1-888-SLOAN-14 (1-888-756-2614).
LIMITED WARRANTY
Sloan Valve Company warrants its Optima EAF-100/150 Series Electronic Hand Washing Faucets to be made of first class materials, free from defects of material
or workmanship under normal use and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and
serviced, for a period of three years from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which
prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the sole remedy available under this warranty. No claims will
be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products
directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the battery.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
TThhee O
Oppttiim
maa ffaauucceett
—
— B
Brriinnggiinngg iinntteelllliiggeennccee ttoo w
waatteerr
