VALVE ROUGH-IN
MODEL 186-1 — Low Consumption, 1 gpf (3.8 Lpf)
For Salt Water applications, Sloan Valve Company recommends furnishing
Naval Valves with a Ground Joint Supply Stop. Specify “-GJ” (Ground Joint)
variation.
Salt Water and other non-potable water supplies typically do not require
the use of vacuum breakers. To furnish the valves less the vacuum breaker,
specify the “-XYV” variation.
FLUSH VOLUMES NOTED ABOVE ARE FACTORY SET.
VALVE FLUSH VOLUME ADJUSTMENT RANGE
Urinal:
0.5 to 3 gpf (1.9 to 11.4 Lpf)
Closet:
1.5 to 7 gpf (5.7 to 26.5 Lpf)
FIN. WALL
FIN. FLOOR
2-1/4" (57 mm) MIN.
11-1/2"
(292 mm)
C/L OF
WASTE
C/L OF FIXTURE
1" I.P.S.
(25 mm DN)
SUPPLY †
4-3/4" (121 mm)
† 1" CONTROL STOP IS AVAILABLE WITH WHITWORTH THREAD
3/4" I.P.S.
(20 mm DN)
SUPPLY
C/L OF FIXTURE
11-1/2"
(292 mm)
2-1/4" (57 mm) MIN.
FIN. FLOOR
4-3/4" (121 mm)
Figure 1
FIN. WALL
2-1/4" (57 mm) MIN.
(NAVAL 120) 11-1/2" (292 mm)
(NAVAL 121) 16" (406 mm)
(NAVAL 122) 24" (610 mm)
6-1/2" (165 mm) MIN.
C/L OF FIXTURE
1" I.P.S.
(25 mm DN)
SUPPLY †
FIN. WALL
FIN. FLOOR
4-3/4" (121 mm)
† 1" CONTROL STOP IS AVAILABLE WITH WHITWORTH THREAD
C/L OF FIXTURE
(NAVAL 115) 24" (610 mm)
(NAVAL 116) 27" (686 mm)
2-1/4" (57 mm) MIN.
C/L OF WASTE
1" I.P.S.
(25 mm DN)
SUPPLY †
4-3/4" (121 mm)
FIN. FLOOR
FIN.
WALL
† 1" CONTROL STOP IS AVAILABLE WITH WHITWORTH THREAD
2-1/4" (57 mm) MIN.
1" I.P.S.
(25 mm DN)
SUPPLY †
C/L OF FIXTURE
11-1/2"
(292 mm)
FIN. FLOOR
FIN. WALL
4-3/4" (121 mm)
† 1" CONTROL STOP IS AVAILABLE WITH WHITWORTH THREAD
NAVAL 110 — Water Saver, 3.5 gpf (13.2 Lpf)
NAVAL 111 — Low Consumption, 1.6 gpf (6.0 Lpf)
NAVAL 115 & 116 — Water Saver, 3.5 gpf (13.2 Lpf)
NAVAL 115-1.6 & 116-1.6 — Low Consumption, 1.6 gpf (6.0 Lpf)
NAVAL 120, 121 & 122 — Water Saver, 3.5 gpf (13.2 Lpf)
NAVAL 120-1.6, 121-1.6 & 122-1.6 — Low Consumption, 1.6 gpf (6.0 Lpf)
NAVAL 180-1 — Low Consumption, 1 gpf (3.8 Lpf)
