Slide Kamera AION IQ, User Manual

Page: 8 / 14

8
AION
TM
IQ
Selecting FREE Mode the user does not determine any reference points, the-
refore the position at which the cart stands at that moment is marked as „0”
(starting point). From that starting point, any position to the left is determined
as a negative number whereas any position to the right, as a positive number.
The direction of movement is indicated with currently set speed value. If the
currently set speed is in the opposite direction it is marked with the sign „
-
”.
2.2.2.2. Recording
Recording mode is designed to record the movements of cart in order to play
it back later in Playback mode. Movement control (SPEED and DAMPING) is
exactly the same as in Free Ride mode, so the user can change SPEED and
DAMPING parameters at any time during the movement. In order to finish the
recording and return to the menu press the joystick. The controller can store 59
seconds of the recording. Recorded movement is stored in the controller until
the power supply is switched off.
Current position of the cart, measured in mm [1]
Maximum speed of the cart set by the user [2]
Currently set speed [3]
Acceleration / deceleration time [4]
If length of the recorded movement exceeds 59 seconds, a message on the
screen will appear informing the user that the controller memory is full.
To stop the recording before the end of 59 seconds, press the joystick. In or-
der to play back the recorded movement, return to the main menu and enter
Playback mode.
2.2.2.3. Playback
Playback pmode plays back movements of the cart saved in Recording mode.
Once you enter Playback mode the screen displays information about the
length of the recording or the lack of it.
FreeRide -271.9
90 -40 1.2
FREE Mode
FreeRide 1100.1
200 169 1.2
1
2 4
3
Video Rec 668.7
Memory Full