7
5923
5
2022
-
SRP & SRP-IP user manual
Maintenance
MC_0063
!
Please refer to the graphic for special considerations relating to your model
!
As a part of the seasonal service of your Thruster perform these maintenance checks while the vessel is in these circumstances:
In Water
• The area around cables inside the boat are clean and dry. Ensure there are no signs of water leakage in the area.
•
All electrical connections are clean and fastened fi rmly.
• Ensure that your batteries are in good condition.
• Bolts holding the thruster components together are fastened securely.
Out of Water
• Check the propeller(s) or tunnel for any damage for example impact damage.
• The propeller(s) is fastened securely to the gear leg.
• Paint the propeller and gear leg with anti-fouling before every season to keep it clean from sea growth.
(NB: Never paint the anode, sealing or
propeller shaft. Ensure paint does not enter the space between the propeller and the gear leg.)
• Change the anode(s) before every season, or when half the anode has corroded. Always use a sealant or thread glue on the holding screw to
ensure that it does not fall off.
• Check the drive shaft in the retract mechanism is lubricated and for any excess movement.
•
*(Excluding SR80 & SR100 models)
Check for excess movement in the break-away rings securing the actuator. If the actuator can be moved more than 3 mm via manual force,
replace the break-away rings.
(NB: Spare rings are included from the factory and must be kept on-board.)
•
*(Excluding 300mm models)
Check Rubber element for leakages or cracks every year and change every 2nd year.
•
*(Excluding SR80 & SR100 models)
Check twist rings for cracks or other damage.
• Check the hatch is fi rmly secured and for no excess movement.
MG_0480
Check and re-lubricate
with waterproof grease if
necessary
Retract mechanism anode
(Both sides)
Check these areas for leaks
Gear leg anode
(Both sides)
DO NOT apply anti-fouling
DO NOT clean with chemicals,
hot water or high-pressure
water jet in this area.
SR80 & SR100 Maintenance