SLEEPTRACKER TEMPUR-Ergo Smart Base, Installation Manual, Page: 12 / 54

22 23
Screw the legs into the base. Do not
overtighten.
Locate the QR code sheet. Set it aside
for later.
• The customer will need this QR
code in order to connect to the
Sleeptracker app.
Untie the bundled cables in the head
section of the base, and run them
under the central leg bar and across the
horizontal split toward the foot section.
Plug the white USB extension cable
into the white Sleeptracker Smart
Cable on the foot section of the base.
STEP
5
STEP
6
STEP
7
STEP
8
MAKE ALL CABLE CONNECTIONS
Plug the USB charger cable into the
free port of the W-shaped splitter cord,
located next to the motor control box in
the foot section of the base.
Plug the head motor cable, marked with
a yellow #1 tag, into the head motor port
on the control box, labeled with a #1.
Plug the remaining head vibration cable
into the free #4 port on the control box.
STEP
9
STEP
10
STEP
11
Remove the tie from the bundled
power supply cable (attached to the
activated carbon pouch in the foot
section of the base). Connect the
power supply cable to the power
supply from the electronics bag.
STEP
12