Prepare Safety
Rail Hinge Pins
for Installation.
Factory preset has hinge pins that may be extended.
These pins need to be adjusted evenly on both
sides to fit properly when inserted into the posts.
NOTE: Full instructions for safety rail adjustment are found on page 10.
CLOCKWISE
INCREASES play.
COUNTER-CLOCKWISE
DECREASES play.
Strike
Hing Pin
Install Four Rails
for DUAL VIEW
option.
7
IMPORTANT:
When installing the Back Panel
the Barrel Bolts need to be away from the frame,
toward the wall.
Install
Back
Panel.
Set in place with
alignment pins, then
fasten with (2) 90mm
Allen Bolts to each post.
NOTE:
Not necessary
for Dual View option
ALIGNMENT
PINS
Use both hands to pivot
the safety rail up to attach
it securely to the posts.
Aluminum
Cleat
Install Safety Rails,
Bunkie Board, or
Box Spring, then
Mattress.
Insert the safety rail hinge pins
into both posts when safety rail
is in the down position.
Mattress
Box Spring, or Bunkie Board
NOTE:
For Full and Queen size
beds, use provided bed slats for
installation between the
aluminum cleats.
Use 25mm
Allen Bolts to
attach both
Cross Supports
to the Aluminum
Cleats.
Cross
Supports
Attach Headboard
and Footboard
to Side Panels.
Attach Cross
Supports to
Aluminum Cleats.
(Use 4mm Allen Wrench
to fasten all Allen Bolts)
