Slate RAVEN MTX User Manual Download

Page: 34 / 85

RAVEN MTX DIGITAL PERFORMER USER MANUAL 34

This button alllows users to quickly hide the open floating windows.

NAVPAD:

Launches a floating navigation window where you can Scroll using two=fingers,
up-down-left and right.

There are two NAVPAD’s on the RAVEN Mixer. One floating window, and one
built into the toolbar. Both have the same functionality.

Put the window anywhere on the screen by grabbing one of the two side

handles.

NOTE:

Separate your fingers when using a two-finger gesture for proper performance.

Within RAVEN Settings we have included the NAVPAD Response Button. When
touched, users are able to adjust the NAVPAD sensativity of their touch from
levels 1 through 20. 1, being the slowest response and 20 being the fastest.

Summary of Contents for RAVEN MTX






















































































Search results

Summary of Contents for RAVEN MTX

Reviews:

Related manuals for RAVEN MTX

Brands by name

Popular brands

Slate RAVEN MTX, User Manual

Search results

Summary of Contents for RAVEN MTX

Reviews:

Related manuals for RAVEN MTX

Brands by name

Popular brands