ENGLISH
21
• Tighten the slackline as much as possible with
the lever not extended.
• Extend the lever and repeat the operation. Make
sure that both rows of teeth of the slotter shaft
behind the stopper are engaged.
Fig. 15
• Push the extended lever back again until
it engages.
• Pull the locking mechanism back and completely
close the Slack-Ratchet.
• Engage the locking mechanism below the locking
tooth so that the ratchet is completely shut
and thereby secured.
Fig. 16
• Repeat the tightening at fixed-point 1 until the
desired tension has been reached.
• In case the line is too slack, retighten it.