ENGLISH
17
2. FASTENING OF SLACK-RATCHET XT-R 45 TO FIXED-POINT 1
• Slide the slack release through the Steel-Ring
twice from the bottom up and around the back
bolt.
• Pull the slack release thus far to the Steel-Ring
until the seam rests against the Steel-Ring.
Fig. 5
• The slack release must lie against the
Steel-Ring crease-free.
• Thread the slack release 5–6 times around Steel-Ring
and bolt, depending on the desired tension.
Fig. 6
MAKE SURE THAT EACH LAYER OF THE SLACK
RELEASE IS THREADED ABOVE THE PREVIOUS
ONE.
Fig. 7
