STEP 1. INSTALL BATTERIES
• Open the back compartment with a small screwdriver
• Insert batteries as shown at the right side.
• Exceptionally use batteries AA with 1.5 V.
STEP 2: DETERMINE WHERE YOU WANT TO INSTALL THE TIMER
Option 1
- Installation on a flat surface: place the timer on a flat surface, such as a table. B. on a table,
a chair, etc. The smallest user must be able to operate the timer (height selection). Make sure to set up
the timer and the stand at least 3m / 118 inch away from the play course.
Option 2
- Installation of a wooden substructure: buy a 10cm x 10cm / 4 inch x 4 inch squared timbers in
a DIY market and build a stand for the timer (see two suggestions below):
Option 3
- Attach to the side of a tree: determine where you want the timer to hang. Height should be
able to be reached by the shortest user. Use a drill to make a hole slightly larger than the diameter of the
screw. Tools are not included. Place screw into the hole and leave about 12mm / 0,5 inch of the screw
out so you can hang the timer. Hang the timer off the screw. Please never use options 2 and 3 in public
areas unless you have express permission to do so. Assembly only on private property.
WARNING! NEVER PLACE THE TIMER ON THE FLOOR.
THERE IS A RISK OF INJURY FROM TRUMPING.
WARNING! THIS PRODUCT MUST BE UNPACKED AND INSTALLED BY AN ADULT.
If you have any questions about your product please contact us: [email protected]
MANUFACTURER: B4Adventure, Denver, CO 80216
IMPORTEUR: MTS Sportartikel Vertriebs GmbH, Hans-Urmiller-Ring 11, D-82515 Wolfratshausen, Germany
