What To Expect
Watching TV
Remember:
Look for an
A
at the top of the screen to see if you're watching an analog
channel.
Analog video is sent in a 4/3 format, or your TV can display these channels in a16/9 format
by pressing the FORMAT buttons to view the different formats available.
Remember:
Look for a
D
at the top of the screen to see if you're watching a digital channel.
Most digital video is sent in a 16/9 format which does fill your screen, but sometimes is sent
in 4/3 which does not fill your
screen. It depends on how the station or source device is
formatting the video. If there are bars on-screen, press the FORMAT buttons to try a
different format that may eliminate the bars. Some bars can't be removed because of
the way the format is sent by the broadcaster.
Digital channels can have both primary channels (like the analog channel number) and
subchannels. To tune to a digital channel with a sub-channel, such as 10-1 as shown in the
graphic to the left, enter the primary channel number (10), then press SUB CH button. to
enter the sub-channel number (1) and press OK. Depending upon the type of signals you
have connected to your HDTV, you might notice that the channels change slower than
you're used to. This is perfectly normal. Digital cable channels sometimes take longer to
tune.
Changing Channels
ANTENNA/CABLE INPUT
Lets you connect a coaxial cable to receive the signal from your
antenna, cable, or cable box.
DIGITAL AUDIO OUTPUT S/PDIF(Coaxial)
Use a digital coaxial cable to connect your TV
to a compatible audio receiver.
AUDIO/VIDEO INPUT (AV1)
Lets you connect a device that has composite video jacks, such
as a VCR or DVD player.
L AUDIO
Provides left audio connection when using the VIDEO INPUT 1 and Component
Video jack. The left audio connectors usually white. For mono audio sources be sure to use
the Left audio input.
R AUDIO
Provides right audio connection when using the VIDEO INPUT 1 and Component
Video jack. The right audio connector is usually red.
COMPONENT INPUTS
Lets you connect a device that has component video jacks, such as a
DVD player.
CMPT Y Pb Pr (Component Video)
Provides optimum picture quality because the video is
separated into three signals. Use three video-grade or component video cables for the
connection. When using CMPT Y Pb Pr, make sure you connect left and right audio cables to
the L and R AUDIO jacks.
HDMI1/DVI INPUT
Lets you connect a device, such as a digital cable box, with an HDMI or a
DVI output.
HDMI1/DVI INPUT
(High-Definition Multimedia Interface/Digital Visual Interface) Provides
an uncompressed digital connection that carries both video and audio data by way of an
integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI),
the jack on the back of your TV is also compatible with DVI devices.
DVI AUDIO
shared with PC AUDIO(Stereo mini jack) when using the HDMI jack for DVI.
-13-
-13-
Connections and Setup
Explanation of Jacks (in alphabetical order)
75 ANT
S/PDIF
PC JACK
PC
HDMI1
Y
Pb
Pr
VIDEO
L
R
-AUDIO-
AV1 IN
This section describes the jacks on the back panel of your TV. There are several ways to
connect devices.
Summary of Contents for SKYWORTH SLTV-32L29A-2
Page 36: ... 35 35 ...
Page 37: ... 36 36 8R28 ...
