background image

Troubleshooting

If you have the following troubles when use this product, please use the method we tell you 
to solve, if the trouble couldn't be solved through the following methods, please contact 
our company or the authorized service center; do not try to dismantle the product to repair 
by yourself, or accident might occur.

No sound and picture

Have picture but no sound

No image or black/white screen

Picture/sound is disturbed

Blurred/snow screen with noise

Remote controller fails to work

In PC mode, display NO SIGNAL

In PC mode, display NOT SUPPORT

Check the connection of power supply
Press Power key to power on TV

Check whether mute function is used
Check whether the volume is 0
Check the connection of all cables

Adjust the color
Check whether the broadcasting settings are correct

Check whether the television is too close to other electronic 
product, move it away or change a power socket

Check the connection, direction and position of antenna
Generally it's caused by the indoor antenna

Replace new batteries
Clear the upper edge of the controller (IR receiving window)
Check whether the batteries are installed correctly

Check whether the signal cable is connected to PC
Check whether the PC is powered on

Check the maximum resolution and field frequency of the 
video card and then make comparison with the display mode.

Summary of Contents for LCD-42L29-FHD























Reviews: