10
Function and Control
ON/OFF button
Press this button can turn on or turn off the air conditioner.
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according to ex-factory
setting. Set temperature can’t be
adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press " " or " " button can adjust fan
blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "-" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press " " or " " button to adjust fan blowing angle.
●
When selecting dry mode, the air conditioner operates at fan1, fan speed can’t be adjusted. Press " " or " " button to adjust
fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. Press "FAN" button to adjust fan
speed. Press " " or " " button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under heat mode. Press "+" or "-" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press " " or " " button to adjust fan blowing angle. (Cooling only unit won’t receive
heat mode signal. If setting heat mode with remote controller, press "ON/OFF" button can’t start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend
on indoor ambient temperature).
● Set temperature range from remote controller: 16~31°C; Fan speed: auto, fan1, fan2 , fan3 , fan4, fan5, stepless speed.
Auto
Cool
Dry
Fan
Heat
fan1
fan2
fan3
fan4
fan5
stepless speed
AUTO
Note:
●
When selecting " " with remote controller, it’s auto swing. up&down swing louver of air conditioner will swing up&down
automatically at the maximum angle.
● When selecting " , , , , " with remote controller, it's the fixed position
swing. Up&down swing louver of air
conditioner will stop at that position as shown by the icon to swing.
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), fan1( ), fan2 (
) ,fan3 (
) , fan4 (
), fan5
(
), stepless speed.
Note:
● In AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.
● Fan speed under dry mode is fan1.
● After entering the stepless speed mode, users can adjust the fan speed according to the button "+" or "-".
button
button
●
Press this button the up&down swing function can be started and canceled. The remote controller defaults to static swing condition.
●
Press "MODE" button and " " button at the same time when remote controller OFF to switch between simple swing and static
swing.
●
In static swing condition, pressing this button, the swing angle of up&down swing louver changes as below:
● Press this button the left&right swing function can be started and canceled. The remote controller defaults to static swing condition.
●
Press "MODE" button and "
" button at the same time at remote controller OFF to switch between simple swing and static swing.
●
In static swing condition, pressing this button, the swing angle of left&right swing louver changes as below:
No display
No display
