28
3
Attachment specification
Part name
Instruction
water supply hose
universal joint
installation instruction
wrench
Part name
Inlet valve
Control
Panel
Power line
Cabinet
Adjustable feet
Wash and spin tub
Door assembly
Detergent box
The above picture is just for refference,the detailed
information should be based on the real product
！
Notice
：
1.the first use may drain
some water out. It's
residual water after
performance test,
belong to the normal
phenomenon.
2.After each use, please
pull the plug and turn off
the faucet to prevent
accidental flood or fire.
Non-fault conditions
The door can't
open.
There is an odor.
There is too little
water when wash
and rinse.
No water
inflowing.
Water inflows
halfway
Water outflows
when washing.
Remaining time
changes
There is abnormal
noise when spin.
The washer can't
work after the
failure of electricity.
he program is running.
There are clothes between the door and
door seals.
There may be a smell of rubber because
some components are made up of rubber.
Roller washing machine just needs a little
water when operating.
Is the tap turned on?
Is the inlet pipe frozen?
Are the filters blocked?
If the water level declines, the washer will
supply water automatically.
Check if add the detergent with too much
bubbles.
If clothes are off center when spin,
spinning time will extend to correct the
deviation.
Check if the power line touches with cabinet.
Have the transport bolts been dismantled?
Are there some hairpins or coins in the roller?
The washer will stop working after the
failure of electricity. When the power is
restored, it still can't continue to work.
Please press the power button and
reset the program.
