20
11
。
9
To
a
void
t
he
c
hildren
w
rongly
o
perations
If you want to start child lock function, you should push prewash buttonfor 3
seconds during the running process of washing machine. To unlock child lock
function, you can push prewash button for 3 seconds during the running
process or under non- running process. (Please check the detailed introduction
of child lock function in the “additional function introduction”).
1 0 Display
S
creen
To display the remaining time or prewash time
Remaining time gradually reduce in accordance with the washing.
During the process of washing, if there is a abnormal phenomenon, the screen
will display the error code accordingly.
If the remaining time is different with the real time, the program will adjust
according to the real situation. It is not an error.
If the program has self-weight function, the screen will display” - - -“. If washing
machine is in the process of weighting, the screen will flash” –“. If the weighting
function ends, the screen will display the remaining time of washing.
11 The reminding window of washing status
There are four indicator lamp on the top, represent weighting, washing, rinse
and spin.
When setting the programs before washing, if some indicator lamp lights, it
means that this washing program has the following washing process; When the
machine is running, if one indicator lamp lights, it means the current washing
process is under this status; If some indicator lamp always flash, it means that
the following washing process include the corresponding programs.
Child Lock Lamp
The introduction for single spinning program
1. preparation for washing
Open the door, put clothes in and closes the door.
2. Press the power button, connect the power.
3. Rotate the program button and choose the “single spinning”
The default rotate speed is 88r/m, pressing “rotate speed” button
can adjust the speed.
4.Press the start/pause button
Begin to drain away water and spin.
5.When the program ends, it will have a hum sound.
If you want to change the current settings during the process of spin,
please push the “Start/Pause” button to stop the washing machine
During the process of spinning, the actual spinning speed may be
inconsistent with the program speed, which is because the washer
adjust the speed according to the balance between clothes.
There may be rhythmic drone during spinning, which is the normal
voice of drain bump rather than the machine fault.
The machine will not wash and rinse, only spin.
and then push “spin speed” button to change.
Rinse and Spin function Introduction
1.Prepare washing
Open the door and put the cloths then close the door
2. Push “Power” button and connect to the power
3. Turn the program button to choose”Rinse+ Spin” program
The washing program will be selected automatically. Take reference on
page 21.
Choose the proper spin speed and rinse times.
4.Push “Start/Pause “button to start washing.
5.When the program ends, it will have a hum sound.
If you want to change the current setting, please push “Start/Pause”
button first and stop washing, then push “Rinse” and “Spin Speed”
The Spin speed can be selected the highest, but the temperature
cannot be set.
The machine will not wash, only rinse and spin.
button to reset.
