Skywell 5T1.5, User Manual, Page: 10 / 16

Time Required: 15 minutes
Recommended Frequency: Quarterly
NOTE:
5) Once all the filters have been replaced, you may wish to flush them to provide
any taste inconsistency while they are being broken in. See instructions for filter
flushing on Page 6.
6) Close cabinet door and plug Skywell back in.
Replacing the UV System
Time Required: 20 minutes
Recommended Frequency: Every 8-9 months
Replacing water filters
10
The filter manifold
1) Unplug your Skywell and wait for any noises to cease.
2) Open the front cabinet door to expose the filter
manifold.
3) Place a bowl or other device below the filters to catch
any water that may drip out as a result of releasing filters.
4) From left to right, replace the filters one at a time:
1.
Swivel existing filter up until it is para-
llel to the ground.
2.
Pull out the filter element
3.
Insert new filter and until it locks into
place.
4.
Gently lower the new filter to its ver-
tical position.
If you purchased a service plan through Skywell, a certified technician will
perform all replacements of filters for your machine.
UV Specification: model BS-ZSZ5-8W-WHF, input voltage 24VDC, input current 260
mA, power consumption 8W. It is recommended that a Skywell technician perform
this maintenance function,including UV light proper handling
，
changment and
disposal. (Before perform this maintenance, disconnect the electrical source of supply
to the UV radiation before opening cover). Please contact Skywell for support.