SG-7100 - Hardware Guide
© SkyWave Proprietary 35 T300, Version 01
3.7
Mount the SG-7100
3.7.1
Required Materials
You require the following materials to install an SG-7100. These do not ship with the
unit.
6 x #8 pan head screws (length is determined by mounting surface)
Power Cable
Note:
For installation in heavy duty vehicles, the optional load dump
protection power cable (ST100334-001) is required.
3.7.2
Determine Terminal Orientation for Accelerometer Use
If using the optional Telematics card accelerometer on the terminal, mount the terminal in
one of the configurations shown below. Refer to [
] for further details.
Figure 34 Accelerometer and Terminal Orientation
3.7.3
Mount the Unit
1.
Consider the mounting guidelines before drilling any holes and ensure the LEDs are
visible once mounted. The unit is not waterproof. Use it in an indoor environment,
