ASSEMBLY
1
、
2
、
10
Insert the Straight Tube A(1) into the Straight B(2) secure with screw(3) as shown
Repeat this step to attach the three remaining Straight Tube A
and Straight Tube B together( not shown)
1
2
3
Units A
Install each Frame unswedged(4) and each Frame Swedge(5) onto each Units A using
M8 x 100mm
Bolt(8)
with two M8 Washers(7) and two spacers(6) and one M8 Cap locknut(12).
Then install Frame Swedge(5) onto Frame unswedged(4) using M6 x 40mm bolt(11) with M6 Washer(10)
and M6 Cap Nut(9) as shown below.
6
7
7
12
8
10
9
11
5
4
4
Units A
NOTE :Do not overtighten the hardware , otherwise this will damage the product .
Units A
Units A
Units A
