ASSEMBLY
11
1
.
Insert the Left Handle(1) into Left Foam(3) as
shown A.
Then insert the Right Handle(2) into Right Foam(4)
as shown B.
2. Insert the Right Handle(2) with foam into Left
Handle(1) with foam as shown, secure with a
M6x32mm Bolt(10), M6 washer(12) and a
M6 Nut(11).
3. Locate the Leg welding(5), a Spacer(7) and a Leg(6)
as shown, then secure with M6x60mm Bolts(13),
M6 Nuts(11) and M6 Washers(12).
Note:
Do not tighten the nuts yet.
4. Locate another leg(6) and a Spacer(7) beside the
Leg welding(5) as shown, secure with M6x60mm
Bolts(13), M6 Nuts(11) and M6 Washers(12).
Note:
Do not tighten the nuts yet.
1
2
3
4
A
10
B
A
B
1
1
12
11
4
3
2
2
Notice:
If the foam is pre-installed on the handle, go to
step 2.
two holes
5
5
6
6
7
7
13
13
11
12
11
12
11
12
1211
13
13
