skywalker sports STT200 Assembly Installation, Care Maintenance And User Instructions Manual Download Page 2

If you have questions after reading this manual, please call our toll-free Customer Care Hot  

Line. Our trained technicians will provide immediate assistance.  

 WARNING  

Read the assembly, installation, care, maintenance, and use instructions in this manual  

prior to assembling and using this equipment. Save this manual for future reference. 

(Model STT200 ID label location) 

(Warning label location) 

REPLACEMENT PARTS or QUESTIONS  

Customer Care Hot Line: 1-866-603-5867  

Monday --- Friday, 8:00 am ---- 5 p.m. Mountain Time 

CONTENTS

2

Questions ..............................................................2 

Replacement Parts.................................................2

Warning.................................................................2

Warning for safe use ............................................3

Assembly and Installation Instructions ................3

Care and Maintenance Instructions.......................3

Play Ground Surfacing Materials..........................4

User Instructions....................................................5

Parts Lists..............................................................6-7

Assembly...............................................................8-11

Limited Warranty...................................................12

Read and understand warnings listed 

below before using this product.

Failure to follow these warnings may 

result inserious injury and/or property 

damage.

Owner must ensure that all players know and 

follow these rules for safe operation of the system.

• Adult supervision is required at all times when the 

  teeter totter is used by children.

• To reduce risk of entanglement, keep small 

  children away from the teeter totter area at all 

  times.

• When properly assembled and used as intended,

  this teeter totter is designed to provide many 

  hours of playing enjoyment.

• Never let children climb on the teeter totter as 

  this can result in the teeter totter falling over 

  causing serious injury or death.

• The metal frame of the teeter totter will conduct 

  electricity. Lights, extension cords, and all such 

 electrical equipment must never be allowed to 

  come in contact with the teeter totter.

• Inspect the teeter totter before each use. Make 

  sure all parts are correctly and securely positioned

 and attached. Tighten any loose hardware. Replace 

  any worn, defective, or missing parts.

• Wear comfortable clothing free of hooks, snaps, 

  drawstrings or anything which may snag or catch 

 in the teeter totter. Remove jewelry, necklaces, 

  and earrings.

• Read all instructions and complete all assembly 

   before using.

• Adequate overhead clearance is essential. Provide 

  clearance for wires, tree limbs, and other possible 

  hazards.

• Lateral clearance is essential. Place the

  teeter totter away from walls, structures, fences, 

 and other play areas. Maintain a clear space on all

  sides of the teeter totter. 

• A minimum of 3m from frame edge is 

  recommended.

• Never set-up the teeter totter in heavy rain, wind

  or storm conditions, especially storms.

• When moving the assembled teeter totter have at 

  least two people evenly holding the frame to lift the 

  teeter totter off the ground.

• Place the teeter totter on a level surface before 

   use.

• Secure the teeter totter against unauthorized and 

  unsupervised use.

Please pay attention to the below items of 

  teeter totter:

• check all nuts and bolts for tightness and tighten 

  when required

• Keep pole top covered with cap at all times.

• oil all metallic moving parts;

del 

 

de i

ywa

 Bo

USA

.S

STT200

n China

 

lker Holdi

x 547, Bri

kywalkert

Mo

   Skywalker Sports 

 

Ma

Sk

PO

www

 Stationary Teeter Totter

ngs,    LLC

 

gham City, UT, 84302   

 

rampolines.com

 

 Factory address: Qingda Industrial Park 

 Chengyang Qingdao Shandong China

THIS PRODUCT IS INTENDED 

FOR USE BY CHILDREN FROM 

AGES 4 TO 8.

“This conforms to ASTM F1148 ,

 Consumer Safety Performance 

Specification for Home 

Playground Equipment.”

(Warning label advertencia) 

Summary of Contents for STT200

























Reviews: