LISTA DE PIEZAS PARA EL BALANCIN
7
Perno Cuadrado M8X53
Perno M8X50
Perno M8X68
Perno M6X15
Tuerca M8
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE AND WILL VOID WARRANTY.
Owner must ensure that all players know and follow these rules for safe operation of the system.
To ensure safety, do not attempt to assemble this system without following the instructions
carefully. check entire box and inside all packing material for parts and/or additional instruction
material. Before beginning assembly, read the instructions and identify parts using the hardware
identifier and parts list in this document. proper and complete assembly, use, and supervision are
essential for proper operation and to reduce the risk of accident or injury. A high probability of
serious injury exists if this system is not installed, maintained, and operated properly.
• a recommendation to place the toy on a level surface at least 2 m from any structure or
obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical
wires;
• detailed instructions on how anchors are to be installed to prevent overturning or lifting of the
support members during normal or foreseeable misuse also taking into account the condition of
the soil normally encountered;
• instructions that anchors shall be placed level with or under the ground in order to reduce
tripping hazards;
• instructions that toys (for example swings, slides, climbing frames) shall not be installed over
concrete, asphalt or any other hard surface;
• a recommendation on the orientation of the toy in relation to the sun (e.g. slides);
• information to keep assembly and installation instruction for further reference.
Most injuries are caused by misuse and/or not following instructions.
Use caution when using this system.
TOOLS REQUIRED
•
Dos (2) Adultos Capaces
• Cinta Métrica
• Martillo
• #2 o #3 destornillador de “Phillips”
• Lentes de Seguridad
• Grandes y Pequeñas Llaves Inglesas
Ajustables
Herramientas Necesarias:
Huso M8X174
9
10
11
13
14
15
16
Arandela M10
17
Perno M8X53
12
Llave Hexagonal 6mm
Llave Inglesa
Destornillador-L
19
18
