background image

LInE SYSTEM

To provide you with an optimal line system, we have worked and calculated meticulous-
ly. Skywalk works in cooperation with the line manufacterer LIROS, and for the VENOM 
we selected the optimal combination of materials especially for motorgliding.
Using a generous scale of dimensioning, the lines offer exceptionally high
weight load reserves crucial for motorgliding.
The intelligent combination of both Technora and Dyneema lines is both robust and of-
fers less resistance.
Excellent rebounding effect even under extreme load as well as a minimum of
stretch, are also proof of the quality of the line mix. 
The skywalk VENOM is equipped with 3 A-, 3 B-, 3 C-, and 1 Stabilo line as well as 2 D-
Main lines.
The load-bearing lines are composed of Top Lines and Main Lines. The Main Lines com-
prise 3 Top Lines together and lead to the line locks (Maillon Rapide) which connect the 
load-bearing lines with the risers.)
The Stabilo Lines connect the upper Stabilo-forked lines with the Line Shackle.
The Brake Lines are not load-bearing and lead from the rear edge of the glider over the 
Main Brake Line through the pulley on the D-riser to the Brake Handle.
For easier identification, the A-Lines the A-Riser are red and the Stabilo Lines are pink.
The B-Lines, the Main Brake Lines and the Brake Lines are yellow, and all of the other 
lines are blue.
The Shackles are triangular, and an elastic band prevents the looped-in lines from slip-
ping.

35

Summary of Contents for VENOM

































Reviews: