40
a compatibility test must be carried out!
By the installation of the Rescue in the bottom
Container, be careful that when inserting the Res-
cue Handle into the inner Container, that the
Splints first release, and then comes the pull on
the inner Container.
Stirrups with Separation System
The stirrups should only be adjusted when all other aspects of the harness have been
adjusted. The leg stretcher is connected to large rings on the sides of the harness by
means of buckles. On the right side the plastic bar of the rescue system (connected to
the rescue release handle) is conducted towards the leg stretcher through a designated
pocket; approximately 10 cm after the ring it is led into the folded eye of the belt as a
safety pin. Subsequently, the Neoprene protection is pulled over. This system is also to
be examined for compatibility in connection with releasing the rescue in a harness si-
mulator.
