back Protectors
The CULT XC is delivered with the built-in Protectors. Before the first flight it is neces-
sary to ensure the correct placement and therefore guarantee the correct function.
Assembly takes place through the opening (Zipper) underneath the velcro for the Res-
cue Connection Line.
Here, pay attention that the protector is pushed into the appropriate pocket and the
chest riser is laying outside.
reScue SYSteM and leG cOver aSSeMblY
The CULT XC can be combined with most current Rescue Systems on the market (in-
cluding steerable models). The initial installation of the Rescue must be carried out by a
certified compatibility tester.
The tester checks the deployment capability of the Rescue and certifies the compatibil-
ity on the Rescue packing certificate.
It is very important that the pilot himself/herself carries out the test deployment of
the Rescue, sitting in the Harness in the Simulator, because different body types and
strength can affect the deployment. Before assembly, it must be checked if the Rescue
needs to be repacked. The packing interval normally averages six months, according
to the operating instructions of the Rescue.
All necessary connecting parts, e.g. screw lock links, must be on hand.
connection of rescue Handle with the rescue container
The release handle of the integrated rescue system container is part of the CULT XC
Harness. Only this release handle may be used. The inner container is part of the res-
cue system. Therefore, also, only this container may be used. The release handle must
be linked to the designated loop on the inner container. If there is no loop available on
the inner container, this should be added by qualified technical personnel.
33
