A. While the receiver is switched off, push either “ON” button, the relevant receiver is switched on and the brightness keep the former
status.
B. While the receiver is switched on:
-Push corresponding “ON” button, adjust the light brightness circularly,
-Push the same “ON” button second time, stop at present position
-Push “ON” button again, adjust the light brightness circularly again
C. While the receiver is switched on, push corresponding “OFF” button to switch off power supply.
(3) All ON/All OFF( 16 Channels)
Push “All-OFF” button to switch off all 16 channels’ power supply. Push “All-ON” button to switch on all 16 channel’s power supply.
Push “Function” (viii) button to make the “FUN” appeared in the LCD screen, now the handset can set up the configure and
automation functions.
1. Clock setup; Push Clock (ii), “Fun & CLK” appears on the screen.
2.Timer Program Setup(18 groups totally); Push “Program” key (iii) to enter timer setup, and “FUN” & “PROG” sign become highlighted. It will
be clock status (chapter 1) after 10-second no touching.
Button Name
Function and display
CLOCK
Back to CLOCK mode (chapter 1)
RND
Back to Random mode (chapter 4)
Program
Push 1 time to enter program mode and follow 1ON-1OFF-2ON- …-16OFF sequence.
P-3*4
Select the different switch and follow I1-I2-I3-I4-II1-II2 - IV2-IV3-IV4-IV1234 sequence.
CD
Back to CD mode. (chapter 3)
CD-RUNSTOP
CD function works after 1
st
push and pauses afer 2
nd
push.
HOUR/TEMP+
The hour will add one hour after pushing 1 time.
MIN/TEMP-
The minute will add one figure after pushing 1 time.
CANCLE
The configure will be cancelled after long-term push (“X” sign appears on the screen) and resumed after
2
nd
push(“X” sign disappears)
TEMP-SET
Back to Temperature mode (chapter 5)
3 Count down; Enter CD status while push CD button (iv). The “FUN” & “CD” signs will be highlighted. It will return to clock status after
10-second no touching. Count down range: 0—99Hour,1-59Min, when the setup is 0hour & 0min, the CD-Run/Stop button is invalid.
Button Name
Function and display
CLOCK
Back to CLOCK mode (chapter 1)
RND
Back to Random mode (chapter 4)
Program
Push 1 time to enter program (chapter 2)
P-3*4
Select the different switch I1-I2-I3-I4-II1-II2 -- IV2-IV3-IV4-IV1234 sequence.
CD
Back to CD mode.
CD-RUNSTOP
CD function works after 1
st
push and pauses afer 2
nd
push.
HOUR/TEMP+
The hour will add one hour (It is invalid when CD is running)
MIN/TEMP-
The minute will add one minute (It is invalid when CD is running)
CANCLE
The configure will be cancelled after long-term push (“X” sign appears on the screen) and resumed after
2
nd
push(“X” sign disappears)
TEMP-SET
Back to Temperature mode (chapter 5)
4 Random Setup; Push RND button to enter random status. The “FUN” & “RND” signs will be highlighted. It will return to clock status after
10-second no touching.
Button Name
Function and display
CLOCK (ii)
Select 12/24 Hour mode after holding 3-second push
RND
Push one time to enter RND mode (chapter 4)
Program (iii)
Push one time to enter Program mode (chapter 2)
P-3*4
No function
CD (iv)
Count-down setup (chapter 3)
CD-RUNSTOP
After count-down setup, it works after one-time push and pauses after 2
nd
time push.
HOUR/TEMP (v)
The hours will raise one hour, push longer to auto raise. The second position is zero..
MIN/TEMP
The minutes will raise one minute, push longer to auto raise. The second position is zero.
TEMP-SET (vi)
Enter temperature setting mode (chapter 5)
CANCLE
Long-term push to make PROG/CD/TEMP/RND invalid. Push again to resume the function setup.
Summary of Contents for REMOTE CONTROL 16CH TIMER
Page 7: ......
