TRAMPOLINE FRAME ASSEMBLY
WARNING:
2 adults in good physical condition are required for the following assembly.
Wear proper shoes and maintain balance to prevent a fall. Failure to follow
all instructions and warning exactly may result in serious injury.
Connect parts C-1 and C-2 together and continue
to complete the circle, following the pattern: C-1 +
C-2 + C-1 + C-2. Continue until you form a
complete circle. Joining the last bar may require
two or more adults in good physical condition. With
a second person holding the opposite end, bring
both sides of the circle together and secure them.
Lay out the
trampoline parts
on the ground
so that you start
to form a circle
with the top rial
sections. Make
sure to keep all
the tubes in the
same direction
all around the
trampoline
frame.
Frame layout
If your frame does not seem sturdy this should not worry you, as the trampoline
mat will tighten it up.
Note:
Step
1
Step
2
Step
3
Attach the two leg extensions, part F-1 and F-2 to the leg base part G, and tightly secure
together with screws (part H). Note: The 7.5’ and 10’ trampolines only have F-2 parts, so
you attach the F-2 on both sides. Repeat this step for all legs.
Construct the Legs
7.5' Trampoline
10' Trampoline
