TESTING THE TRAMPOLINE
After assembling the trampoline, it is important that you perform the following
safety checks:
Using a screw driver, check if all the screws are tightly secured.
Look under the trampoline and check that all the springs are hooked securely
between the frame and triangle rings.
Move the trampoline around and check the sturdiness of the frame.
Using your two hands, put your body weight on one section of the trampoline and
release to check that the floor is even.
Inspect the cover pads and check that they completely cover the springs and frame.
Make sure the strings of the safety pads are tied securely.
Trampoline Safety Checks:
Take hold of the safety net and check that all the enclosure poles are sturdy by
shaking it.
Check the safety net for any tears in the stitching or material.
Ensure the enclosure net zipper and entrance hooks function properly.
Check to see if the safety net is fully attached to the triangle rings by attempting to
lift it at intervals. If gaps are detected, tighten the rope attachment until no more
gaps appear.
Once all the checks are performed and the trampoline has passed all the initial tests,
perform a final test by having one person jump continuously for 5 minutes in the
center of the trampoline. If the trampoline feels sturdy then your trampoline passes
the test.
Congratulations, you have completed the trampoline assembly! Remember to abide
by all the safety rules. Have fun, play safe ...
Enclosure Net Safety Checks:
