PROGRAMMING SETUP
PROGRAM STEP 1:
Set THERMO mode
to your desired
cool
temperature (for example, 67
o
)
Press the
[MODE]
button to place the transmitter into THERM mode,
Press the
UP
or
DOWN
icons on the touchscreen to select the target temperature you
want for cooler periods of the day (for example, 67
o
).
The transmitter will send either a THERMON or THERMOFF signal to the appliance every 2 minutes,
based on the set temperature and the ambient temperature in the room. The temperature swing
differential will determine at what temperature the room needs to drop down to before the
thermostat will send a THERMON signal. For example, if the swing is 2
o
, the room will drop to 65
o
before the thermostat will call for heat when the THERMO mode is set to 67
o
.
Note: The highest set temperature is 99 ºF.
PROGRAM STEP 2:
Setting the Temperature Swing Differential
The THERMO Mode on the transmitter operates the appliance whenever the room temperature varies a certain number
of degrees from the set temperature. This variation is called the “SWING” or TEMPERATURE DIFFERENTIAL. The factory
preset swing temperature is 2
o
F. To change the “Swing Setting:”
Simultaneously press the
[SET]
button and the
DOWN
icon on the touchscreen to display the current “swing”
setting in the set temp frame. The letter “S” will display in the room temp frame on the LCD screen.
Press the
UP
or
DOWN
icon on the touchscreen to adjust the “SWING” temperature (1
o
-3
o
F).
Press the
[SET]
button to store the “swing” setting.
PROGRAM STEP 3: Plan your programs
Example Programs:
WEEKENDS ( S S
)
On the weekends,
I like it to be warm all day and cooler at night.
Program 1 ON at 5:00 AM until
OFF at Noon (12:00 PM)
set Warm Target Temp: 72
o
Program 1 ON & OFF Times must be between midnight (12:00 AM) and noon (12:00 PM)
Program 2
ON at Noon (12:00 PM)
until OFF at 11:00 PM set Warm Target Temp to 72
o
Program 2 ON & OFF Times must be between noon (12:00 PM) and midnight (12:00 AM)
At 11:00 PM, the target temp will drop to the cool temperature set in
PROGRAM
STEP 1
.
WEEKDAYS (M T W T F)
On weekdays, I like it to be warm in the morning, cooler when I am at work, warmer when I
come home, then cooler at night. This is the factory preset program for weekdays:
Program 1 ON at 5:00 AM until OFF at 9:00 AM set Warm Target Temp: 72
o
At 9:00 AM, the target temp will drop to the cool temperature set in
PROGRAM
STEP 1
.
Program 2 ON at 4:00 PM until OFF at 10:00 PM set Warm target Temp: 72
o
At 10:00 PM, the target temp will drop to the cool temperature set in
PROGRAM
STEP 1
.
Plan
your
program using this worksheet:
Thermostat (Cool) Target Temperature:
_____
o
WEEKENDS:
Program 1: (ON) Warmer at __:_____ (OFF) Cooler at __:___ Warm Target Temp: ____
o
Program 1 ON & OFF Times must be between midnight (12:00 AM) and noon (12:00 PM)
Program 2: (ON) Warmer at __:_____ (OFF) Cooler at __:___ Warm Target Temp: ____
o
Program 2 ON & OFF Times must be between noon (12:00 PM) and midnight (12:00 AM)
WEEKDAYS:
Program 1: (ON) Warmer at __:_____ (OFF) Cooler at __:___ Warm Target Temp: ____
o
Program 1 ON & OFF Times must be between midnight (12:00 AM) and noon (12:00 PM)
Program 2: (ON) Warmer at __:_____ (OFF) Cooler at __:___ Warm Target Temp: ____
o
Program 2 ON & OFF Times must be between noon (12:00 PM) and midnight (12:00 AM)
Summary of Contents for RC-AA-PROGR
Page 8: ......
