QUICK SET-UP GUIDE
FOR Model 3003P PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the programmable transmitter.
For detailed instructions for each feature and function, see OWNER”S MANUAL.
1. SCALE (DEGREE F/ DEGREE C) –
Press UP or DOWN button. Press SET
button.
2. DAY OF WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR OF DAY – Press UP or DOWN
button. Press SET button. NOTE: AM
or PM on LCD.
4. MIN. OF DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push SET button.
You may not have to change factory
setting, but you must push SET button.
+
+
-
-
SMALL
BUTTON
BACK OF
TRANSMITTER
1. Remove battery cover.
2. Insert (2) AAA batteries.
3. Press Small button.
4. Replace batter cover.
All remaining programming
wil be made from the front of
the transmitter now.
1
2
3
4
OPERATION – Press MODE button on TRANSMITTER to change operating functions.
INITIAL SET-UPSET FUNCTIONS USING BUTTONS ON FRONT OFTRANSMITTER
1
2
3
4
1
ON
indicates the system is ON, either manually or
thermostatically.
2
OFF
indicates the entire system is turned OFF.
3
THERMO
indicates the system will automatically
cycle ON/OFF thermostatically depending on
programmed SET temperature.
4
PROG
indicates the system is operating with
PROGRAM settings.
OTHER OPERATIONS – Press corresponding buttons on TRANSMITTER to activate functions.
TIME OF DAY
– Press & release TIMER/TIME button for less than 1-second.
TIME OPERATION
– Press and hold TIMER/TIME button for 2-seconds.
COUNTDOWN TIME
-- pressing UP or DOWN buttons.
NOTE:
Press SET button to stop LCD digits from flashing.
Model: 3003P
REV. 12-7-12 Page 13
AHEAD
TIMER
PROG
TIME
UP
MODE
DOWN
BA
CK
SE
T
AHEAD
TIMER
PROG
TIME
UP
MODE
DOWN
BA
CK
SE
T
