REV 8-14-17 Page 14
Skytech: 3002P
QUICK SET-UP GUIDE
FOR SKYTECH 3002P PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the SKYTECH programmable transmitter.
For detailed instructions for each feature and function, see OWNER”S MANUAL.
1. SCALE (DEGREE F/ DEGREE C) –
Press UP or DOWN button. Press SET
button.
2. DAY OF WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR OF DAY – Press UP or DOWN
button. Press SET button. NOTE: AM
or PM on LCD.
4. MIN. OF DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push SET button.
You may not have to change factory
setting, but you must push SET button.
1. Remove battery cover.
2. Insert (2) AAA batteries.
3. Press Setting button.
4. Replace batter cover.
All remaining programming
will be made from the front
of the transmitter now.
1
2
3
4
OPERATION – Press MODE button on TRANSMITTER to change operating functions.
INITIAL SET-UPSET FUNCTIONS USING BUTTONS ON FRONT OF TRANSMITTER
1
2
3
4
1
ON
indicates the system is ON, either manually or
thermostatically.
2
OFF
indicates the entire system is turned OFF.
3
THERMO
indicates the system will automatically
cycle ON/OFF thermostatically depending on
programmed SET temperature.
4
PROG
indicates the system is operating with
PROGRAM settings.
OTHER OPERATIONS – Press corresponding buttons on TRANSMITTER to activate functions.
TIME OF DAY
– Press & release TIMER/TIME button for less than 1-second.
TIME OPERATION
– Press and hold TIMER/TIME button for 2-seconds.
COUNTDOWN TIME
-- pressing UP or DOWN buttons.
NOTE:
Press SET button to stop LCD digits from flashing.
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
MODE
COVER CLOSED
MODE
TIMER
TIME
SET
SLIDE COVER
OPEN
+
+
-
-
AAA
BACK OF
TRANSMITTER
SETTING
BUTTON
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
