background image

 

 

3 - 10   

Congratulations to the purchase of our SkyTec subwoofer. 
Read the instructions thoroughly prior to using the unit. 
 

SAFETY INSTRUCTIONS 

 Hearing 

damage: 

SkyTec loudspeakers are easily generating high 
sound pressure levels (SPL) sufficient to cause 
permanent hearing damage to performers, 
production crew and audience members. Care 
should be taken to avoid prolonged exposure to 
SPL in excess of 85 dB. 

  Make sure that the amplifier is switched off 

when the speaker box is connected or 
disconnected. 

  The box must be installed by a qualified 

technician who has knowledge of the 
techniques.  

  Do not overload the box to avoid damage to the 

speakers. 

  Connect the box only to a good quality 

amplifier: 
Direct voltage at the amplifier output will 
damage the speakers 
“Clipping” (overdrive) of the amplifier can 
damage the woofer, tweeter and horn speaker 

  Do not overload the speakers to avoid damage 

to the components. 

  Do not place an open fire (candle, etc.) on top 

or next to the box  - FIRE HAZARD 

  For indoor use only. If the box is used outdoors, 

you need to make sure that no humidity can 
enter the box. 

  Make sure that the box is placed on a stable, 

solid surface. 

  The boxes can be stacked but do not put more 

than 60kg weight on the box. 

  The boxes can be hung. Use only strong and 

approved mounting material. The installation 
should only be carried out by a qualified 

technician who has knowledge of the 
techniques and regulations regarding the 
mounting/hanging of speaker boxes. During the 
mounting, make sure that nobody is standing 
below the mounting area. 

  Use only stands which are designed to support 

the weight of the speaker. Do not attempt to 
place more than one speaker on a stand 
designed for a single speaker. 

  Do not place liquids on the box and protect it 

against humidity. Humidity can shorten the life 
time considerably. 

  Only use suitable means of transportation if you 

want to move the box – BEWARE OF YOUR 
BACK!! 

  If the unit is damaged to an extent that internal 

parts are visible, DO NOT connect the unit and 
DO NOT switch it on. Contact your dealer or 
SkyTronic.  

  Never try to repair the unit yourself. It does not 

contain any user serviceable parts. All repairs 
must be carried out by a qualified technician. 

  Set the amplifier to the lowest volume prior to 

switching it on. 

  Keep the unit out of the reach of children. 

 
 

Protect your environment. Recycle packing 
material whenever possible. 
 

Do not throw a faulty unit into normal 
household waste but bring it to a special 
collection point. A large part of it can be 
recycled. 

 
CONNECTIONS: 

First of all, check the specifications of the amplifier if it is suitable for your speaker boxes. Pay particular 
attention to the power rating and impedance. Check if the amplifier is switched off. If yes, you can switch on the 
speakers. PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same 
sign of every side i.e. the + of the amplifier must be connected to the + of the speaker box. If the connections 
are inverted, the sound quality will diminish.Only use high quality speaker cables that are suitable for the power 
and distance between the amplifier and the speaker.  
 

Connection of several speakers: 

A subwoofer is specially designed to reproduce the low frequencies (basses) and not the whole frequency 
range. If you want to reproduce the full frequency range, you need to use this subwoofer in combination with a 
full range speaker box such as the SM10. 
The connections can be made in two ways: 1 amplifier for 4 speakers. 2 amplifiers – one for the subwoofer 
(mono/bridged) and one for the (stereo) box. (See fig.). If a second speaker is connected in parallel (see fig.), 
the impedance of 8 Ohms will reduce to 4 Ohms. Please check if your amplifier can handle this. If more than 
two speakers are connected in parallel, the impedance will fall below 4 Ohms. Most of the amplifiers are not 
suitable for this! 
 

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would 
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or 
disrespect of the warnings contained in this manual. SkyTronic cannot be held responsible for personal injuries caused by a 
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

 

Summary of Contents for SMW Serie











Reviews: