NiMH
NiCd
Pb
Batt
Type
Operation
Program
Description
RE-PEAK
In re-peak charge mode, the charger can peak charge
the battery once, twice or three times in a row
automatically. This is good for confirming the battery is
fully charged, and for checking how well the battery
receives fast charges.
CYCLE
1 to 5 cyclic and continuous process of charge>discharge
or discharge>charge is operable for battery refreshing
and balancing to stimulate the battery's activity.
LiPo
LiHV
Lilon
LiFe
This charging mode is for charging LiPo/LiHV/LiFe/LiIon
battery in normal mode.
CHARGE
This program is for charging or discharging lithium battery
which will not be used for long time.
STORAGE
This mode is for balancing the voltage of lithium-polymer
battery cells while charging.
BAL
CHARGE
The charger will charge NiMH and NiCd batteries using
the charge current set by the user.
CHARGE
COLD CHG
DISCHARGE
Charging Program
Depends on different battery type, the operation programs are different.
DISCHARGE This mode is for discharging LiPo/LiHV/LiFe/LiIon battery.
DISCHARGE This mode is for discharging NiMH/NiCd battery.
This mode is for charging Pb battery in cold days when the
temperature is 5
℃
to -20
℃
.
This mode is for discharging Pb battery.
NORMAL CHG This mode is for charging Pb battery.
AGM CHG
This mode is for charging AGM battery.
1) LiPo Battery Connection
2) NiMH/NiCd or Pb Battery Connection
STOP
STATUS
START
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT
THE CHARGE LEADS TO THE CHARGER FIRST,
AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK.
WARNING!
2. Connecting the battery
The balance wire of the battery must be connected to the charger.
Always remember to keep right polarity in the connection. Please
refer to the wiring diagram above
,
which shows a correct way for
your LiPo battery connection in the balance charge mode.
In the other modes, there is no request to connect the balance wire
to the balance socket in the charger.
But we suggest to charge your battery in balance mode for better
performance.
STOP
STATUS
START
Power and Battery Connection
This charging mode is for charging Mavic/TB4X battery
in normal mode.
CHARGE
This program is for charging or discharging Mavic/TB4X
battery which will not be used for long time.
STORAGE
Mavic
TB4X
Charge Operation
Lithium Battery Pack
NiMH Battery Pack
· 12
B6 V2
13 ·
B6 V2
