Introduction
Please read this entire operating manual completely and
attentively before using this product, as it covers a wide range of
information on operating and safety. Or please do use this
product in company with a specialist!
LCD Display
DC Input
11-18V
Scroll Through
the Main Menu
Stop Any Charge
Processes
Alter Values
See the Status
of Individual Cells
Resume or Start
Charge Processes
Temperature
Sensor Port
Output Socket
Balance Lead Socket
Voltage Calibration (for expert user only)
SkyRC B6 V2 allows you to calibrate the voltage directly on the
device with a 6S LiPo battery. (For more information please contact
us at [email protected])
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for
each channel. You can keep the data pertaining to program setting of
the battery of continuous charging or discharging. Users can call out
these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
Balancing Individual Cells Battery During Discharging
During the process of discharging, SKYRC B6 V2 can monitor and
balance each cell of the battery individually. Error message will be
indicated and the process will be ended automatically if the voltage of
any single one cell is abnormal.
Memory of Last Operation
SkyRC B6 V2 will memorize your last operation of charging/
discharging before power off.
AGM Charge and Cold Charge
For Pb batteries, there are two more charging modes: AGM charge
and Cold charge.
Optimized Operating Software
SkyRC B6 V2 features the so-called AUTO function that sets the
feeding current during the process of charging/discharging. For
Lithium batteries, it can help prevent overcharging which may lead to
explosion. It will disconnect the circuit automatically and alarm once
detecting malfunction, to achieve maximum safety and minimize the
trouble. All the settings can be configured by users.
Special Features
· 02
B6 V2
03 ·
B6 V2
DJI Battery Program
SkyRC B6 V2 can charge batteries for DJI Mavic/Inspire with the
maximum charge current of 4A.
DC/DC Converter
SkyRC B6 V2 charger is integrated with DC power input, pumping max
power of 60W with the voltage ranging of 5-26V and 1-6A current.
