16
TABLE 02
PROBLEM
CAUSES
SOLUTIONS
- The machine does not start.
- Electric Power Shortage.
- Problems with electric circuit.
- Check electric power.
- Call Technical Assistance.
- Smoke or burnt smell.
-Problem with internal or
external electric circuit.
- Call Technical Assistance.
- When the Mixer is turned
ON, the tools spin slowly.
- Belt is sliding.
- Motor problem.
- Call Technical Assistance.
- Cord is damaged.
- Problems during
transporta
ti
on.
- Call Technical Assistance.
- Unusual noises.
- Bearings damaged.
- Call Technical Assistance.
- The tools stop during
opera
ti
on.
- Electric power shortage.
- Belt is worn out.
- Safety switch not working.
- Cord or plug damaged.
- The plug is out of the socket.
- The lid is not
fi
rmly closed.
- Make sure the plug is on the
socket.
- Call Technical Assistance.
- Make sure the cord is not
broken, check the plug pins.
-Insert the plug on the socket.
- Properly close the lid.
5
1.2 Main Components
All components of this machine were made of raw materials carefully selected for each
func
ti
on, according to the test pa
tt
erns and Siemsen experience.
PICTURE 01
1 - Lid
2 - Meat Tank
3 - Gu
tt
er
4 - Motor Housing
5 - Right Frame
6 - Le
ft
Frame
7 - ON/OFF Switch
01
02
07
03
06
05
04
