2.1.1 Setting
* The machine shall be installed in a fresh and airy environment , far from
children and other persons not entitled to operate it .
* Do not lean it on any wall , or other equipments , a 20 cm minimum space
allowance shall be provided.
* The machine shall be perfectly leveled .
NEVER MOVE THE EQUIPMENT WHILE IN OPERATION .
2.1.2 Electric Circuit
* Electricity supply is necessary to feed the heating , crushing and
centrifuging , operation steps .
* A single phase two pin 20 Amp. socket is necessary to plug in the cord .
* Electric supply shall be 220 V 60 Hz .
2.INSTALLATION AND PRE OPERATION
2.1 Installation
2.2 Pre Operation
Before to use the Soy Bean Extract Processor be sure all the above
mentioned recommendation have been obeyed . Remember never to
move the processor during operation .
04
09
4.4.1
Advices
Be sure your hair is not loose in order to avoid getting caught by
turning parts which could lead to a serious accident. Tie your hair up well and/or
cover your head with a scarf.
The operation performed by not trained or skilled personnel shall
be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.4 Operation
4.6 Maintenance
4.6.1
Danger
Any maintenance with the machine in working situation is
dangerous. TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING
MAINTENANCE.
4.5 After Finishing The Work
4.5.1
Precautions
Always TURN THE MACHINE OFF by removing the plug from the
socket before cleaning the machine.
Never clean the machine unless it has come to a complete stop.
Put all components back to their functional positions before turning it ON again.
Check level of oil, if any .
DO NOT place your fingers in between belts and pulleys nor chains
and gears.
Electrical or mechanical maintenance has to be undertaken by
qualified personal.
Person in charge has to be sure that the machine is under TOTAL
SAFETY conditions when working .
4.6.2 Advice
5.1 Problem, causes and solutions
5. Analysis and Problems Solving
The Soy Bean Extract Processor were designed to operate with the need
of minimum maintenance but the natural wearing caused by long use of the equipment
may occasionally cause some malfunctions.
If such problem occurs with your extractor refer to Table 03 in which the
most common situations are listed with recommended solutions.
2.2.1 - Cleaning the Bowl
Before the first operation is started , we advise to clean the Bowl and
the filter.
To clean them , proceed with a first boiling process , observing the
following instructions :
* Control the electrical installation in accordance with item 2.1.2
* Close the outflow faucet.
* Control if the thermostat handle is on 0 C , and if the thermostat
switch position is OFF .