background image

02

3

Prepare meat for grinding by removing aII skin and bones

Then cut the

meat into appropriately sized pieces for grinding

4

Feed meat into the grinding chamber with the speciaI meat pusher

that is included with your machine

 Never use fingers

hands

or any

other objects

5

Equipped with enough grease for severaI years usage

DO NOT FILL

If

needed use Lithium generaI purpose grease

6

After use, disconnect the unit from the power supply and disassembIe

the head

Wash throughly to prevent contamination

7

If motor quits, use reset button to reinstate the power surge

8

If the motor stops moving, the motor may be overloaded, causing over-current 

protection switch tripped.

Turn off switch and disconnect the power. After a while ( about one 

minute ), make sure that you  press the Reset, and then turn on the switch.
If you repeat above procesure three times and the motor steel does not work, 
please contact the service centre.

NOTE

During grinding

,

meat should be discharged from the

grinder smoothly. If the discharge is not smooth

or if it is in

the form of a paste

,

the following causes and remedies should

be considered:

Possible Cause                                                 Remedy

1 Coupling Ring too tight                 Loosen and hand-tighten only untilsnug. Don’t over-tighten.
2 Discharge Plate is blocked            Remove Discharge Plate and clean,then re-install
3 Blade edges have dulled               May be sharpened, recommend replacing.

This product will be replaced or repaired under warranty, for a period of (6) months, 
beginning from the date

 

of purchase by the original purchaser/user (“End User”), or 

eighteen  (18)  months  from  the  da te  of  shipment  from  SKYFOOD’s  ware house, 
whichever expires first. 

Accessories  wil l  be  re placed  o r  repaired  under  wa rranty,  for  a  period  of  (30)  days, 
beginning  from  the  da te

 

of  purcha se  by  th e  original  purchaser/user  (“En d  User”),  or 

eighteen (18) months from the date  of shipment from SKYFOOD’s wa rehouse, whichever 
expire s first. 

 

This  warranty  shall  not  take effect  until  a properly completed and  executed 

WARRANTY 

REGISTRATION

  form  has  been  received  by  SKYFOOD EQUIP MENT,  LLC,  within  thirty 

(30) days from the da te of purch ase. The 

WARRANTY REGISTRATION

 is available either 

in the Instruction Manual of every Product or at SKYFOOD’s website www.skyfood .us. The 
End  User must fill out the 

WARRANTY REGISTRATION

  form  and send it to SK YFOOD 

according  to  the  instructions p osted on  the  referred  website. 

Failure to  do  so will VOID 

the warranty

 

No  extended  warranties  for  third  party  products.  There  are  no  other  express 
warranties  or  conditions  othe r  than  the  one  offered  by  each  manufacturer  for 
products  sold  by  SKYFOOD,  not  under  the  FLEETWOOD  by  SKYMSEN  and 
SKY MSEN brand. 

For questions  or assistance, do not return  the p roduct or accessories to the store, please 
call Toll  Free  1-800-503-7534,  or  visit the  Customer Service  section  at  www.skyfood.us. 
For faster service please have  th e  items  name , serial number,  and proof of purchase  for 
the operator to assist you. 
 

SKY FOOD reserve s the right to change  the term s of its limited warranty at any time 
without  any  prior  notice.  It  also  reserves  the  right  to  change  the  design  and 
specifications  of  its  equipment or  any  related documentation  at any  time.  The e nd 
user is not entitled to upgrades or refunds resulting from these changes. 

 

Updates 

These 

Terms and Conditions

 were last updated on January 14

th

, 2014. 

Summary of Contents for Fleetwood TC12IHD









Reviews: