4
It is mandatory to have the three points appropriately
connected before turning the machine on.
Picture - 02
Picture - 03
Protection
0
35
m
m
5
m
8
m
0
2.2 Pre Operation
First check if the Laminating Dough Roller is firm on its position.
Before using it, the rolls must be cleaned with a dry cloth, and if necessary,
with a plastic spatula.
The protection below prevents the operator from putting his hand in between
the rolls.
IMPORTANT
Never use the machine, unless the protections are properly
placed and never clean the rolls when the machine is connected
to the power point.
11
4.5 After Finishing the Work
4.5.1 Precautions
Always clean the machine after using it, and for such, always TURN
THE MACHINE OFF by removing the plug from the socket.
Never clean the machine unless it has come to a complete stop.
Put all components back to their functional positions before turning
the machine ON again.
DO NOT place your fingers in between belts and pulleys nor chains
and gears.
4.6 Maintenance
4.6.1 Danger
Any maintenance operation is dangerous with the machine turned on.
TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING
MAINTENANCE.
4.6.2 How to proceed in case of EMERGENCY
In any emergency situation, press the EMERGENCY button, located
on the upper part of the machine. This will immediately stop the rolls. After
that, open the rolls to the maximum level.
4.7 Advices
Electrical or mechanical maintenance must be carried out by
qualified personnel for such operation.
The person in charge has to be sure that the machine is working
under TOTAL SAFETY conditions.
IMPORTANT
Always unplug the machine in any case of emergency. Never turn
the machine on when the reversion handle is attached to the pinion.
